BlueTube Audio BT-4 Manual del operador descargar pdf (Pagina 20)

15 - Connecting the Speakers

Connecting the Speakers

1. Strip back about 1/2” of the insulation on each of the speaker wires

on both ends.

2. Connect the wire with the white stripe to the red binding post on right

speaker output.

3. Connect the wire with no stripe to the black binding post on the right

speaker output on the back of the amplier.

4. On the other end of the cable, connect the wire with the white stripe

to the red binding post on the back of the right speaker.

5. Connect the speaker wire with no stripe to the black binding post on

the back of the right speaker.

6. Repeat on the left side.

NOTE: If speaker connections are reversed (black to red and red

to black) the speakers will still produce sound, however, they

will be out of phase and the sound quality will not be optimal.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

BlueTube Audio BT-4 Manual del operador Pagina 20